SWPC_OpenGGCM_022712_8
Run Metadata
| Metadata Record: | View Full Run Metadata in the CCMC Metadata Registry (CMR) |
| Metadata as JSON: | View Full Run Metadata as JSON |
| Model Domain: | GM |
| Model Name: | OpenGGCM |
| Model Version: | 4.0 |
| Title/Introduction: | SWPC Challenge |
| Key Word: | dB/dt R2O Challenge 2012 |
| Run type: | Real event simulation |
| Inflow Boundary Conditions: | Time-dependent |
| Start Time: | 2011/08/05 06:00 |
| End Time: | 2011/08/06 12:00 |
| Dipole Tilt at Start in X-Z Plane: | 7.97 ° |
| Dipole Tilt in Y-Z GSE Plane: | -19.08 ° |
| Dipole Update With Time: | yes |
| Ionospheric Conductance: | Sig-CTIM |
| Co-rotation: | No corotation velocity is applied at the inner boundary. |
| Grid: | 3M cells |
| Coordinate System for the Output: | GSE |
| Solar wind input source: | WIND |
| Initial Solar Wind (SW) Parameters in GSE Coordinates: | |
| SW Density: | 5.63400 n/cc |
| SW Temperature: | 39072.40000 Kelvin |
| X Component of SW Velocity: | -397.53500 km/s |
| Y Component of SW Velocity: | -53.47100 km/s |
| Z Component of SW Velocity: | -16.00500 km/s |
| IMF Bx: | 0.00000 nT |
| IMF By: | -4.05400 nT |
| IMF Bz: | 3.05900 nT |
| IMF |B|: | 5.08000 nT |
| IMF Clock Angle: | -52.96000 ° |
Input Data
Output Data
- View pre-computed timeseries data:
- Northern hemisphere polar cap flux and area
- Southern hemisphere polar cap flux and area
- Magnetopause standoff and closest approach within 30 deg. of Sun-Earth line (local noon)
- Polar cap boundary at 24 magnetic local times in northern hemisphere
- Polar cap boundary at 24 magnetic local times in southern hemisphere not available
- Ionospheric dissipation
- View model outputs along satellite trajectories (result of postprocessing on usually longer magnetosphere 3D output time cadence):
- Perform model data comparison for this run using VMR tools (formerly the Virtual Model Repository at the University of Michigan)
Run Services
This interface has been recently updated. If you experience problems or have any questions please contact the CCMC staff.