3D Simulation Results: Model: MAS
Run: Lan_Jian_100212_SH_1a CR=2057 , T= K, N=e8/cm³

This is the web interface to create time series visualizations of results of a three-dimensional simulation of the Sun's environment.

Please review the default selections below and make your changes.

To start the graphics program click the Update Plot button. The resulting image will be displayed at this location of the page.

Should the result be a black image, then the graphics program encountered a programming error. Please report the set of input parameters used.

  Update Plot will update (generate) the plot with the chosen time and plot parameters below.
This will take some time (typically 10-30s) as data are read in and processed.

Date/Time1:  0:00:00 120:00:00  Date/Time2:  0:00:00 120:00:00 Time sampling rate: model data 1s 5s 10s 20s 60s 120s 300s 600s

Plot Options:  Exclude region around the Sun up to RS Use satellite track  Upload trajectory file: Text file with 10 space-separated columns of numbers headed by 'Year Month Day Hour Minute Second ms R Lon Lat' (≤100000 lines of ≤150 characters each). Image magnification  1 0.75 1.25 1.5 2    (all images; use >=1.25 for 3D Flowlines)

Choose Plot Mode: Line (1D) Contour (2D) ColorContour (2D) Color+Contour Trajectory Scalar Trajectory Vector Trajectory Scalar+Vector

Choose quantity to be displayed (some Plot Modes require up to three choices): Q 1: NTPB_rB_lonB_latV_rV_lonV_latJ_rJ_lonJ_latBVJE_rE_lonE_latESP_ramJ_par_rJ_par_lonJ_par_latJ_parJxB_rJxB_lonJxB_latJxBExB_rExB_lonExB_latExBE.JNV_rNV_lonNV_latNVgradN_rgradN_longradN_latgradNE_rE_lonE_latESP_ramJ_par_rJ_par_lonJ_par_latJ_parJxB_rJxB_lonJxB_latJxBExB_rExB_lonExB_latExBE.JNV_rNV_lonNV_latNVgradP_rgradP_longradP_latgradPgradT_rgradT_longradT_latgradTgradBeta_rgradBeta_longradBeta_latgradBetacurlV_rcurlV_loncurlV_latcurlVcurlJ_rcurlJ_loncurlJ_latcurlJ Q 2: NTPB_rB_lonB_latV_rV_lonV_latJ_rJ_lonJ_latBVJE_rE_lonE_latESP_ramJ_par_rJ_par_lonJ_par_latJ_parJxB_rJxB_lonJxB_latJxBExB_rExB_lonExB_latExBE.JNV_rNV_lonNV_latNVgradN_rgradN_longradN_latgradNE_rE_lonE_latESP_ramJ_par_rJ_par_lonJ_par_latJ_parJxB_rJxB_lonJxB_latJxBExB_rExB_lonExB_latExBE.JNV_rNV_lonNV_latNVgradP_rgradP_longradP_latgradPgradT_rgradT_longradT_latgradTgradBeta_rgradBeta_longradBeta_latgradBetacurlV_rcurlV_loncurlV_latcurlVcurlJ_rcurlJ_loncurlJ_latcurlJ  Q 3: NTPB_rB_lonB_latV_rV_lonV_latJ_rJ_lonJ_latBVJE_rE_lonE_latESP_ramJ_par_rJ_par_lonJ_par_latJ_parJxB_rJxB_lonJxB_latJxBExB_rExB_lonExB_latExBE.JNV_rNV_lonNV_latNVgradN_rgradN_longradN_latgradNE_rE_lonE_latESP_ramJ_par_rJ_par_lonJ_par_latJ_parJxB_rJxB_lonJxB_latJxBExB_rExB_lonExB_latExBE.JNV_rNV_lonNV_latNVgradP_rgradP_longradP_latgradPgradT_rgradT_longradT_latgradTgradBeta_rgradBeta_longradBeta_latgradBetacurlV_rcurlV_loncurlV_latcurlVcurlJ_rcurlJ_loncurlJ_latcurlJ Note: divergences, gradients and curls are not yet available with SWX plot modes.

---

Plot Options for selected Plot Modes:

Trajectory Plots:   View angles:     AX [-90..90]:    AZ [-180 ... 180]: Color Contour, Trajectory Scalar:    Color table:  B-W LINEAR BLUE/WHITE GRN-RED-BLU-WHT RED TEMPERATURE BLUE/GREEN/RED/YELLOW STD GAMMA-II PRISM RED-PURPLE GREEN/WHITE LINEAR GRN/WHT EXPONENTIAL GREEN-PINK BLUE-RED 16 LEVEL RAINBOW STEPS STERN SPECIAL Haze Blue - Pastel - Red Pastels Hue Sat Lightness 1 Hue Sat Lightness 2 Hue Sat Value 1 Hue Sat Value 2 Purple-Red + Stripes Beach Mac Style Eos A Eos B Hardcandy Nature Ocean Peppermint Plasma Blue-Red Rainbow Blue Waves Volcano Waves Rainbow18 Rainbow + white Rainbow + black gsfc2-95 blue-white-red Black-Blue-White-Yellow-Red DTU-Purple-Blue-White-Yellow-Red cividis viridis magma plasma inferno    Lock color range:        Min.:   Max.:    Log scale (use all data>0 in non-negative fields) Contour:   show values with contour levels Vector:  length of arrows: 0.3 1.0 3.0 10

---

Choose Plot Area:   Line Plot and Trajectory Plot: Select start point of line on the left, the end point on the right.    (Color)Contour Plot: Select start point of spatial line on the left, the end point on the right. A time interval of non-zero length has to be selected, too.

R1	R2	Range: 1 ... 30 RS
Lon1	Lon2	Range: 0 ... 360 deg.
Lat1	Lat2	Range: -90 ... 90 deg.

  Reset Form will reset changes to the defaults specified by the previous run of this script.
  Update Plot will update (generate) the plot with the chosen time and plot parameters above.

---

List Data (check to get any of the following outputs):

What:

Plot variables from above Include all primary model output parameters (Warning: text files may become large). You have to select vector magnitudes (e.g., "B","V","J") explicitly for plotting to get them:     computed scalars such as     derived vectors (e.g, "JxB"): select one component or its magnitude to get all components Include parameters from this list in addition to those selected for the plot: (copy names from Q1 list above and separate them with commas).

Where:

List Data From Plot: 2D plots (Contour, Vector, ...):      equidistant 61x61-element grid in cut plane (Interpolate data onto equidistant grid selected)      max. 44000 grid positions (Interpolate data onto equidistant grid unchecked) LinePlot: data along line plotted,

---

Curator of visualization:
Last modifield: 2024-07-08