# Example CME input file
# Optional user comments can go here (start the comment line with #)
#
#--------------------------------------------------
# Data should be 8 columns:
# 01  date: CME leading-edge time at ENLIL inner boundary of 21.5 Rs (yyyy-mm-ddThh:mm)
# 02   lat: Latitude of the cone axis (HEEQ deg). Range: -90 to 90 deg.
# 03   lon: Longitude of the cone axis (HEEQ deg). Range: -180 to 180 deg.
# 04  rmaj: Major radius of the cone (deg) (half-angle). Range: 5 to 90 deg.
# 05  rmin: Minor radius of the cone (deg). Setting rmin=0 computes default rmin=rmax.  Range 5 to 90 deg, rmin should not exceed rmaj.
# 06  tilt: Angle between radius of the cone and solar equator (deg). Range: -180 to 180 deg. CCW - positive
# 07  vcme: CME leading-edge speed (km/s). Range: 50 to 4000 km/s.
# 08  vend: CME trailing-edge speed (km/s). Choosing vend=0 computes default value). Range: 50 to 4000; vend cannot exceed vcme.
#--------------------------------------------------
#           date  lat  lon rmaj rmin tilt vcme vend
#--------------------------------------------------
2021-04-16T19:44  3 134  10  0 0 324 0
2021-04-17T20:42 -8 -125 38  0 0 882 0
2021-04-19T05:46 10 23   21  0 0 161 0
2021-04-19T21:12 -2 -90  26  0 0 299 0
2021-04-20T06:38 -7 -37  28  0 0 583 0