# Example CME input file # Optional user comments can go here (start the comment line with #) # #-------------------------------------------------- # Data should be 8 columns: # 01 date: CME leading-edge time at ENLIL inner boundary of 21.5 Rs (yyyy-mm-ddThh:mm) # 02 lat: Latitude of the cone axis (HEEQ deg). Range: -90 to 90 deg. # 03 lon: Longitude of the cone axis (HEEQ deg). Range: -180 to 180 deg. # 04 rmaj: Major radius of the cone (deg) (half-angle). Range: 5 to 90 deg. # 05 rmin: Minor radius of the cone (deg). Setting rmin=0 computes default rmin=rmax. Range 5 to 90 deg, rmin should not exceed rmaj. # 06 tilt: Angle between radius of the cone and solar equator (deg). Range: -180 to 180 deg. CCW - positive # 07 vcme: CME leading-edge speed (km/s). Range: 50 to 4000 km/s. # 08 vend: CME trailing-edge speed (km/s). Choosing vend=0 computes default value). Range: 50 to 4000; vend cannot exceed vcme. #-------------------------------------------------- # date lat lon rmaj rmin tilt vcme vend #-------------------------------------------------- 2017-07-21T01:00 -5 150 32 20 -25 300 0 2017-07-21T02:30 -6 117 38 23 -20 600 0 2017-07-23T05:20 10 -175 38 23 -15 950 0 2017-07-23T06:00 -10 -150 40 22 20 2700 0