Registered Model Settings for CEDAR ETI Challenge
Model setting tag | Model setting description |
31_CTIPE | CTIPe runs driven by high-latitude electric potential and particle precipitation obtained from SWMF |
51_CTIPE | CTIPe runs with AMIE electric potential and particle precipitation (run with magnetometers, SuperDARN, and DMSP inputs, provided by ASTRA) |
7_TIE-GCM | TIE-GCM 1.94 driven by AMIE (from ASTRA) with dynamic co-latitude |
8_TIE-GCM | TIE-GCM 1.94 with SWMF |
9_TIE-GCM | TIEGCM-CMIT |
1_CTIPE | CTIPe 2.0 w/ Weimer2005 |
2_CTIPE | CTIPe runs at NOAA/SWPC with Weimer 2005 using 1-minute solar wind and IMF from ACE; particle precipitation from TIROS/NOAA auroral particle measurements; (f10.7+f81)/2; and the (2,2), (2,3), (2,4), (2,5), and (1,1) propagating tidal modes are imposed at 80 km altitude with a prescribed amplitude and phase |
5a_CTIPE | CTIPe runs with AMIE (run with magnetometers and SuperDARN inputs, provided by ASTRA) |
5b_CTIPE | CTIPe runs with AMIE (run with magnetometers inputs, provided by ASTRA) |
11_CTIPE | CTIPe_3.2 w/ Weimer2005 (ACE IMF and Solar Wind data) |
0_GITM | 0_GITM |
1_GITM | 1_GITM |
3_GITM | 3_GITM |
6_GITM | GITM_2.5 w/ Weimer2005 (ACE IMF and Solar Wind data) |
1_HWM07 | HWM07 model |
1_IRI | IRI-2007 |
2_IRI | IRI-2012 with NeQuick model for topside Ne, MSIS-86 neutral composition |
4_IRI | IRI-2016 with URSI foF2 model, NeQuick for topside Ne, NRLMSISE00 neutral composition |
1_JB2008 | original JB2008 |
2_JB2008 | JB2008 with Weimer temperature correction |
1_NRLMSISE-00 | Original NRLMSISE-00 model |
2_NRLMSISE-00 | Original NRLMSISE-00 model plus yearly corrections to exospheric temperature and density and composition at 120 km, based on annual average ratio of orbit derived densities to MSIS (Emmert, JGR, A06315, 2009; Emmert et al., GRL, L12102, 2010). This version of NRLMSISE-00 was used in the SAMI3 runs. |
1_SAMI3 | 1_SAMI3_HWM93 |
1_SAMI3_HWM07 | 1_SAMI3_HWM07 |
1_SAMI3_HWM93 | 1_SAMI3_HWM93 |
1_TIE-GCM | TIE-GCM v.1.93 with Heelis |
2_TIE-GCM | TIE-GCM1.94 with Weimer-2005 |
3_TIE-GCM | TIE-GCM1.94 with Weimer 2005 high-latitude electric potential in double resolution |
4_TIE-GCM | TIE-GCM1.94 with Weimer 2005 and SABER/TIDI lower boundary conditions in double resolution |
5_TIE-GCM | TIE-GCM1.94 driven by AMIE with constant critical cross-over latitudes (fixed at 55 and 70 mlat) |
6_TIE-GCM | TIE-GCM 1.94 with AMIE (from ASTRA) |
11_TIE-GCM | TIE-GCM2.0 w/ Weimer2005 (OMNI IMF and Solar Wind data) |
1_UAM | Upper Atmosphere Model (UAM), A.A. Namgaladze et al., FAC as external driver |
2_UAM | UAM with AMIE electric potentials as external drivers |
3_UAM | UAM with Weimer-2005 (and/or Weimer-96) electric potentials |
4_UAM | UAM, driver as 5_UAM, but constraint by using MSIS neutral temperature profiles, 2 min resolution |
5_UAM | UAM, fully theoretical, FAC as external driver, 30 sec resolution |
1_UAM-P | Upper Atmosphere Model (UAM) - Potsdam Version w/ FAC Iijima and Potemra Model (IPM) |
1_USU-GAIM | 1_USU-GAIM |
1_IFM | 1_USU-IFM |
1_USU-IFM | 1_USU-IFM |
Model setting tags uniquely identify individual model settings. Their format is: Number (referring to unique model setting), underscore and a one-word model name (for example, SWMF, OpenGGCM).